Features :

• Standard parameter: ECG,RESP,NIBP, SPO2, TEMP, PR
• 12.1 large-screen color TFT display
• Built in high capacity battery, up to 4 hours working tine
• 7- lead ECG waveforms display , big fonts observational interface
• Reviewable ECG waveforms, maximum 240 hours reviewing graphic trends
• Digital SPO2 technique, precise measurement for weal perfusion and finger shaking
• Arrhythmia and S-T segment analysis and pacemaker detection
• Protection against interference from defibrillation and electrosurgical unit
• Applicable to ICU, CCU, operation, adult, pediatric and neonatal patients

Specification :

• ECG
• Full lead: I, II, III, AVL, AVR, AVF and V
• Gain 5mm/mV, 10mm/mV, 15mm/mV, 20mm/mV and 25mm/mV
• Scanning speed: Changeable with three grades of 12.5mm/s, 25mm/s and 50mm/s
• Band width :0.05Hz-100Hz(3dB)
• Heart rate:
• Scope: 15 times/minute to 300 times/minutes
• Accuracy: ±1 time/minute
• Variation of heart beat LORENZE drawing: Analysis on heart beat data for the current 5 minutes with histogram during RR period.
• Arrhythmia :Twenty kinds of common abnormal ECG can be analyzed, with ECG data of 1000 times of arrhythmia kept and with 10 seconds kept for each time.
• Accuracy: Error rate < 20%
• Undetected rate < 20%
• Analysis function should be started when using the above two kinds of function.
• ST section
• Scope: ±0.8mV
• Precision : ±0.05mV

SpO2

• Detection scope: 0%-100%
• Accuracy : ±1% 90%-100% ±2% 70%-89%

NIBP

• Theory Electric oscillator
• Cuff gassing time less than 15 seconds
• First-time gassing pressure: dynamic state 24kPa 180 mmHg
• Manual selection: 9.3kPa 70 mmHg13.3kPa 100 mmHg16.0kPa 120 mmHg
• 18.6kPa 140 mmHg20.0kPa 150 mmHg21.3kPa 160 mmHg
• Automatic detection period: 1 minute to 240 minutes
• Stop size1 min1 min -10min, 5min(10 min -30min), 10min(30 min -90min) and 30min90 min -240min
• Detection scope:
• Systolic blood pressure: 4kPa -34kPa(30mmHg -255mmHg)
• Diastolic pressure: 2kPa -29.3kPa(15mmHg -220mmHg)
• Mean pressure : 2.7kPa31.3kPa 20mmHg235mmHg
• Detection accuracy
• Static pressure: ±3mmHg
• Pulse rate: ±2%

Resp

• Chest impedance method or concentration of carbon dioxide at end of respiration
• Scope of chest impedance method 0 time/minute – 100 minutes/minute
• Precision of chest impedance method 1 time/minute
• Detection scope of carbon oxygen at end of respiration 3mmHg-75mmHg 0.4%vol-9.9%vol
• Detection scope of respiration rate: 2 times/minute ->60 times/minute including baby
• Detection precision of respiration rate: ±1 time/minute
• Temp
• Single/double path
• Type : Vascular/surface temperature
• Scope: 20C50C
• Accuracy : ±0.2 C

Invasive blood pressure (selected mating)

• Single/double path
• Type: direct and continuous detection
• Scope: -6.67kPa(-50mmHg)—46.67kPa(350mmHg)
• Precision: below 13.33kPa(100mmHg) ±0.27kPa(2mmHg) 13.33kPa(100mmHg) above ±2%
• Frequency responseDC-12Hz
• Input resistance: not less than 500kΩ
• Sensitivity of sensor: 5μV/V/mmHg
• Motivation voltage5V (DC)
• Accuracy of sensor: ±2
• Isolation voltage: 4 kV

Invasive blood pressure (selected mating)

• Single/double path
• Type: direct and continuous detection
• Scope: -6.67kPa(-50mmHg)—46.67kPa(350mmHg)
• Precision: below 13.33kPa(100mmHg) ±0.27kPa(2mmHg) 13.33kPa(100mmHg) above ±2%
• Frequency response:DC-12Hz
• Input resistance: not less than 500kΩ
• Sensitivity of sensor: 5μV/V/mmHg
• Motivation voltage 5V (DC)
• Accuracy of sensor: ±2
• Isolation voltage: 4 kV