Introduction:

• Easy to use AED reliable for any lay rescuer..
• Designed to administer fast and safe treatments against cardiac arrests and able to give visual details on lifesaving actions and information throughout a very large display.
• Practical, intuitive with CPR guidance and clear instruction supporting the rescuer through the protocol for effective operation.
• Small and light, working with long life batteries for maximum portability.
• The obvious solution for more expertise rescuers or paramedics to act everywhere: ambulance, dentist, medical office or department, clinic laboratory and also of course at work, school, hotel, airport, railway or bus station, etc
• It can used as ECG monitoring too

Features :

• Biphasic AED with ECG monitoring and with voice instructions and text prompts on a large display used by paramedic rescuers.
• Easy-to-use, fast and practical, Automated External Defibrillator able to give visual/text information and details on lifesaving treatment throughout a very large display.
• It can be used even only as ECG Monitoring.
• Is the right solution for more expertise or demanding paramedic rescuers to save lives everywhere: home, offices, sport facilities, schools, hotels, dentists, airports, railway/bus stations, trains, ferries, discos, beaches, etc.
• Solid and extremely light (2kg) to be transported anywhere emergency is required and always ready to guide rescuers visually and audibly with clear instructions in any resuscitation phase, from the application of the electrode pads through the heart massage till the defibrillation.
• On the 5.7" LED backlight LCD display, the rescuer will see the ECG waveform and get numeric value information on the patient's heart rate and impedance, on the quantity of alarms (fibrillations detected) and shocks delivered, on time rescue duration and battery level.
• Just 3 lifesaving steps: Turn On - Place Pads - Deliver Shock. When running the system recommends to place the pads to the patient's chest and then will continuously monitor, detect, and advise defibrillation therapy to treat cardiac arrhythmias.
• If required, it suggests the rescuer to give the shock by voice/text instruction and a flashing green button. The device is ready to deliver the first shock in few seconds and is able to provide one or more shocks to any patient, children as well as adults.
• A pre-programmed escalating 3-Shock sequence at bidirectional current adapting to the patient's real trans-thoracic impedance This system uses a BTA (biphasic trapezoidal adaptive) technology.A proven effective biphasic waveform in which current travels in one direction and then reverses polarity to travel in the opposite direction. This technology controls the amount of time that a current is delivered in either direction and is able to compensate the current flow of the energy (varying or controlling it) with the patient's level of impedance across the chest. This system has a medical ABS structure, shock resistant and crash worthy, with protection against powder and water.
• This system does not require service program, it runs several self-tests (day/month/half-year) flashing its status with LED indicators.
• This system grants fast response whenever required thanks to a long-life disposable battery. It can also run with rechargeable battery and both power supplies consent to provide numerous shocks.
• A 1GB Memory Card will be able to store up to 40 hours of ECG, events and environmental recordings which the dedicated software can read through and manage.
• A built-in IrDA port can transmit data (wireless protocol) to a thermal printer.

Specification:

• 5.7" LCD display with LED back light that gives the information for (ECG waveform at 25mm/sec speed, HR, impedance, shock and fibrillation counts, energy to deliver, elapsed time, text prompts, charging bar, CPR messages, local data and time, battery status, modality in use, device error messages.
• It can used as ECG monitoring too
• Intelligent arrhythmia detector through multifunction defibrillator pads, analyses the heart rhythm, evaluates and determines when chock is advised
• The analysis time is 4 to 15 sec with impedance of 20 to 200 ohms with high sensitivity and specificity
• ECG monitoring modality
• Energy versions is max 200J at 50 ohms loads as a standard or with max 360J at 50 ohms loads as an option
• Shock protocols from 50 to 360J
• Handy solution for lay rescuers
• IP54 protection against dust and water
• Automatic self-test & status indicators
• Rechargeable long-life battery with Li-Ion accumulator technology with autonomy of 400 shocks or 15 hours in ECG monitoring mode with new or fully charged battery with 2.5 charging time for shelf- life and with 2,5 years or 300 charging cycles
• Disposable battery LiMnO2 non rechargeable with autonomy of 250 shocks or 9 hours in ECG monitoring mode with new battery for shelf- life and with 5 years and 4 years standby life from installation date
• Recordings till 80h & data managing PC software
• Automatic self-test daily / monthly / 6 months in standby mode Data recording and transmission with SMC (smart media card) memory
• Storing at 2GB 80 hours ECG, voice, events and environmental recording or 764 hours ECG only Data managing with PC software
• Transmission with IrDA port for infrared communication to printers
• Multifunction defibrillator pads for single patient, self adhesive and pre-gelled,
• complete with cable and connector for adult size and pediatric size with 24 months self-life.
• Medical grade ABS external case
• Meets IEC 60601-1 clause 21 (impact, drop, force, rough handling, mobile tolerance tests)
• Operating/ standby temperature: 0~55C & 0~95% relative humidity.

Optional Accessories :

• Disposable battery
• Rechargeable battery
• Charger
• Adult or pediatric pads
• Carry case
• Wall cabinet
• Memory card
• Card reader
• ECG cable,
• Thermal printer
• PC software
• AED response kit
• Trainer
• Simulator for defibrillators