We are regarded as one of the chief Electronic Cardiac Pacemaker Exporters in International market. We present a qualitative range of External Cardiac Pacemaker that is designed to for implantation permanently in the body. Cardiac Pacemaker is a battery powered device that monitors electrical pulses in heart when required. It also delivers electrical stimuli that make the heart beat contract in normal rhythm. We provide availability of External Cardiac Pacemaker in different specifications as per the requirements of customers.

Features :

The MM-EPM001 Multi programmable External Pulse Generator offers transitory pacing,
high rate operation and monitoring of cardiac parameters. In addition to this, the models
MM-EPM001-T and MM-EPM001 -LT offers tachycardia termination using extrastimulation and cardiac electrography. The model MM-EPM001 also offers data logging for storing
parameter changes, alarms, warnings, frequency trends, and intracavitary ECG signal. The
MM-EPM001 family can be used for cardiac surgery patients, emergency cardiac pacing,
transitory management of arrhythmias and heart block, tachycardia termination and cardiac monitoring.

As a pulse generator for transitory pacing the MM-EPM001 has the standard pacing modes of a single-chamber pacemaker and delivers pulse rates from 30 to 200 ppm. These modes are:

• Asynchronous (AOO/VOO: SOO)
• Demand (AAI/VVI: SSI)

Pulse Rate, Pulse Amplitude, Pulse Width, Sensitivity, Refractory Period and Hysteresis can be programmed to achieve the highest pacing performance for any patient. The MM-EPM001 has a special function for high rate asynchronous pacing at rates from 120 to 600 ppm for tachycardia termination (overdriving method). The models MM-EPM001 T/LT also offer two additional methods using extrastimuli: pulse bursts and scanning.

Specification :

Programmable Parameters

Pacing : Rate, Pulse Amplitude, Sensitivity, Hysteresis, Refractory Period, Pulse Width. Tachycardia Termination: A) Orthorhythmic: Number of pulses in the initial burst (Ni) and Number of Pulses in the final burst (Nf) B) Scanning: Initial Delay (ID), Coupled Delay (CD) and Number of Pulses per burst (NP)

Pacing

• Normal Rate: 30 ppm to 200 ppm; step: 5 ppm. Accuracy: +/- 0.5%.
• High Rate (overdriving): 120 ppm to 600 ppm; step: 10 ppm. Accuracy: +/- 3%.
• Pulse Amplitude: 0.2 V to 10 V; step: 0.2 V. Accuracy: +/- 0.2 V.
• Sensitivity: 0.2 mV to 12 mV; step: 0.2 mV. Accuracy: +/- 0.2 mV.
• Hysteresis: 0, 5, 10, 15 and 20 bpm.
• Refractory Period: 200 ms to 400 ms; step: 5 ms Accuracy: +/- 1.5%.
• Pulse Width: 0.1 ms to 2 ms; step: 0.1 ms Accuracy: +/- 0.02 ms.
• Emergency: SSI (AAI/VVI) - 70 ppm - 10 V - 2.4 mV - 1 ms.
• Electromagnetic Interference (EMI) Protection: auto-switching to AOO/VOO.
• Defibrillation Protection: up to 400 Joules.
• Software Failure Protection: auto-switching to Emergency Mode.

Tachycardia Termination :

Overdrive : Transitory high rate operation. Patient heart rate is measured automatically
and the overdrive rate is set 30% higher. Overdrive rate up to 600 ppm. For safety reasons unit generates auto-quit if no key is pressed within 20 seconds.

• Orthorrhythmic:
• Ni = 5 to 10 pulses (8).
• Nf = 10 to 20 pulses (15).
• Scanning :
• ID = 200 ms to 400 ms (260).
• CD = 100 ms to 400 ms (260).
• NP = 1 to 10 (5).
• Note: Default values in brackets.

Measurements and Statistics :

• R-R/P-P Interval: 5 ms to 2 sec.
• Patient Frequency: 30 bpm to 300 bpm.
• P-wave or R-wave amplitude.
• Pacing clock: up to 10 days. Accuracy: +/- 0.005%

Presentation :

The MM-EPM001 -T/LT is supplied in a carrying handbag containing:

• One MM-EPM001-T/LT Pulse Generator
• One 5 FT (1.5 meter) extender cable
• One arm strap
• One waist strap
• Two 1.5V AA alkaline batteries
• One operation manual

In addition to this, the model MM-EPM001-LT is also supplied with the following parts:

• One USB O-Box (Optical Box) Interface
• One USB O-Box/PC cable
• One Optical MM-EPM001/O-Box cable
• One MM-EPM001 Data Logger Software Diskette